Skip to end of metadata
Go to start of metadata

You are viewing an old version of this page. View the current version.

Compare with Current View Page History

« Previous Version 2 Next »

Description

Returns detailed information of a single smart device installed at a specific service location:

  • General information
  • Configuration properties
  • Operational Properties
  • Actions

Resource URL

https://app1pub.smappee.net/dev/v3/servicelocation/[SERVICELOCATIONID]/smartdevices/[SMARTDEVICEID]

HTTP method

GET

HTTP header

Authorization: Bearer [ACCESS_TOKEN]

(info) [ACCESS_TOKEN] being the access token received from the Get token or Refresh token authentication calls.

Parameters

ParameterTypeDescription
SERVICELOCATIONIDPath ParameterThe actual id of an accessible service location (see Get Servicelocations)
SMARTDEVICEIDPath ParameterThe actual id of a smart devices installed at the service location (see Get Smart Devices)

Example

https://app1pub.smappee.net/dev/v3/servicelocation/123/smartdevices/CARCHARGER-1

Result

{
  "id": "CARCHARGER-299",
  "uuid": "34dd94f0-e186-43d0-b7c2-cdf59fb9855f",
  "name": "SW-5969",
  "favourite": true,
  "type": {
    "category": "CARCHARGER",
    "name": "greenflux",
    "displayName": "GreenFlux",
    "logoURL": "https://smappeelogos.s3-eu-west-1.amazonaws.com/greenflux/GreenFluxLogo.png",
    "protocol": "MQTT",
    "configurationProperties": [
      {
        "name": "etc.smart.device.type.car.charger.config.greenflux.power.threshold",
        "displayName": "Power threshold",
        "description": "When this threshold is exceeded on one of the phases the fast message frequency is used to send measurement messages to the MQTT Broker.",
        "species": "Quantity",
        "unit": "A",
        "required": true
      },
      {
        "name": "etc.smart.device.type.car.charger.config.greenflux.mqtt.url",
        "displayName": "MQTT Broker url",
        "description": "MQTT Broker url is an optional parameter, but when specified measurements messages are published on this MQTT Broker. Specify as host:port",
        "species": "String",
        "required": false
      },
      {
        "name": "etc.smart.device.type.car.charger.config.greenflux.fast.message.frequency",
        "displayName": "Fast message frequency",
        "description": "Fast message frequency is an optional parameter, default is 5 seconds.",
        "species": "Quantity",
        "unit": "s",
        "required": false,
        "possibleValues": {
          "values": [
            {
              "value": 5,
              "unit": "s"
            }
          ],
          "defaultValue": {
            "unit": "SECOND",
            "value": 5,
            "multiplier": 0
          },
          "exhaustive": false
        }
      },
      {
        "name": "etc.smart.device.type.car.charger.config.greenflux.slow.message.frequency",
        "displayName": "Slow message frequency",
        "description": "Slow message frequency is an optional parameter, default is 60 seconds.",
        "species": "Quantity",
        "unit": "s",
        "required": false,
        "possibleValues": {
          "values": [
            {
              "value": 60,
              "unit": "s"
            }
          ],
          "defaultValue": {
            "unit": "SECOND",
            "value": 60,
            "multiplier": 0
          },
          "exhaustive": false
        }
      }
    ],
    "properties": [
      {
        "name": "current",
        "displayName": "Consumption car charging station",
        "description": "The power that the car charging station is currently using.",
        "species": "Quantity",
        "unit": "W",
        "required": false
      }
    ],
    "actions": []
  },
  "configurationProperties": [
    {
      "value": {
        "value": 10,
        "unit": "A"
      },
      "spec": {
        "name": "etc.smart.device.type.car.charger.config.greenflux.power.threshold",
        "displayName": "Power threshold",
        "description": "When this threshold is exceeded on one of the phases the fast message frequency is used to send measurement messages to the MQTT Broker.",
        "species": "Quantity",
        "unit": "A",
        "required": true
      }
    },
    {
      "value": {
        "value": 5,
        "unit": "s"
      },
      "spec": {
        "name": "etc.smart.device.type.car.charger.config.greenflux.fast.message.frequency",
        "displayName": "Fast message frequency",
        "description": "Fast message frequency is an optional parameter, default is 5 seconds.",
        "species": "Quantity",
        "unit": "s",
        "required": false,
        "possibleValues": {
          "values": [
            {
              "value": 5,
              "unit": "s"
            }
          ],
          "defaultValue": {
            "unit": "SECOND",
            "value": 5,
            "multiplier": 0
          },
          "exhaustive": false
        }
      }
    },
    {
      "value": {
        "value": 300,
        "unit": "s"
      },
      "spec": {
        "name": "etc.smart.device.type.car.charger.config.greenflux.slow.message.frequency",
        "displayName": "Slow message frequency",
        "description": "Slow message frequency is an optional parameter, default is 60 seconds.",
        "species": "Quantity",
        "unit": "s",
        "required": false,
        "possibleValues": {
          "values": [
            {
              "value": 60,
              "unit": "s"
            }
          ],
          "defaultValue": {
            "unit": "SECOND",
            "value": 60,
            "multiplier": 0
          },
          "exhaustive": false
        }
      }
    }
  ]
}

Versioning

Version 3 (v3)

This call was introduced in version 3.


Content

  • No labels