Skip to end of metadata
Go to start of metadata

You are viewing an old version of this page. View the current version.

Compare with Current View Page History

« Previous Version 5 Next »

Description

Returns detailed information of the smart devices installed at a specific service location:

  • General information
  • Configuration properties
  • Operational Properties
  • Actions

Resource URL

https://app1pub.smappee.net/dev/v3/servicelocation/[SERVICELOCATIONID]/smartdevices

HTTP method

GET

HTTP header

Authorization: Bearer [ACCESS_TOKEN]

(info) [ACCESS_TOKEN] being the access token received from the Get token or Refresh token authentication calls.

Parameters

ParameterTypeDescription
SERVICELOCATIONIDPath ParameterThe actual id of an accessible service location (see Get Servicelocations)

Example

https://app1pub.smappee.net/dev/v3/servicelocation/123/smartdevices

Result

[
  {
    "id": "CARCHARGER-299",
    "uuid": "34dd94f0-e186-43d0-b7c2-cdf59fb9855f",
    "name": "SW-5969",
    "favourite": true,
    "type": {
      "category": "CARCHARGER",
      "name": "greenflux",
      "displayName": "GreenFlux",
      "logoURL": "https://smappeelogos.s3-eu-west-1.amazonaws.com/greenflux/GreenFluxLogo.png",
      "protocol": "MQTT",
      "configurationProperties": [
        {
          "name": "etc.smart.device.type.car.charger.config.greenflux.power.threshold",
          "displayName": "Power threshold",
          "description": "When this threshold is exceeded on one of the phases the fast message frequency is used to send measurement messages to the MQTT Broker.",
          "species": "Quantity",
          "unit": "A",
          "required": true
        },
        {
          "name": "etc.smart.device.type.car.charger.config.greenflux.mqtt.url",
          "displayName": "MQTT Broker url",
          "description": "Measurements messages are published on this MQTT Broker. Specify as host:port. When not specified the Smappee MQTT production broker is used.",
          "species": "String",
          "required": false
        },
        {
          "name": "etc.smart.device.type.car.charger.config.greenflux.fast.message.frequency",
          "displayName": "Fast message frequency",
          "description": "Fast message frequency is an optional parameter, default is 5 seconds.",
          "species": "Quantity",
          "unit": "s",
          "required": false,
          "possibleValues": {
            "values": [
              {
                "value": 5,
                "unit": "s"
              }
            ],
            "defaultValue": {
              "unit": "SECOND",
              "value": 5,
              "multiplier": 0
            },
            "exhaustive": false
          }
        },
        {
          "name": "etc.smart.device.type.car.charger.config.greenflux.slow.message.frequency",
          "displayName": "Slow message frequency",
          "description": "Slow message frequency is an optional parameter, default is 60 seconds.",
          "species": "Quantity",
          "unit": "s",
          "required": false,
          "possibleValues": {
            "values": [
              {
                "value": 60,
                "unit": "s"
              }
            ],
            "defaultValue": {
              "unit": "SECOND",
              "value": 60,
              "multiplier": 0
            },
            "exhaustive": false
          }
        }
      ],
      "properties": [
        {
          "name": "current",
          "displayName": "Consumption car charging station",
          "description": "The power that the car charging station is currently using.",
          "species": "Quantity",
          "unit": "W",
          "required": false
        }
      ],
      "actions": []
    },
    "configurationProperties": [
      {
        "value": {
          "value": 10,
          "unit": "A"
        },
        "spec": {
          "name": "etc.smart.device.type.car.charger.config.greenflux.power.threshold",
          "displayName": "Power threshold",
          "description": "When this threshold is exceeded on one of the phases the fast message frequency is used to send measurement messages to the MQTT Broker.",
          "species": "Quantity",
          "unit": "A",
          "required": true
        }
      },
      {
        "value": {
          "value": 5,
          "unit": "s"
        },
        "spec": {
          "name": "etc.smart.device.type.car.charger.config.greenflux.fast.message.frequency",
          "displayName": "Fast message frequency",
          "description": "Fast message frequency is an optional parameter, default is 5 seconds.",
          "species": "Quantity",
          "unit": "s",
          "required": false,
          "possibleValues": {
            "values": [
              {
                "value": 5,
                "unit": "s"
              }
            ],
            "defaultValue": {
              "unit": "SECOND",
              "value": 5,
              "multiplier": 0
            },
            "exhaustive": false
          }
        }
      },
      {
        "value": {
          "value": 300,
          "unit": "s"
        },
        "spec": {
          "name": "etc.smart.device.type.car.charger.config.greenflux.slow.message.frequency",
          "displayName": "Slow message frequency",
          "description": "Slow message frequency is an optional parameter, default is 60 seconds.",
          "species": "Quantity",
          "unit": "s",
          "required": false,
          "possibleValues": {
            "values": [
              {
                "value": 60,
                "unit": "s"
              }
            ],
            "defaultValue": {
              "unit": "SECOND",
              "value": 60,
              "multiplier": 0
            },
            "exhaustive": false
          }
        }
      }
    ]
  }
]

Versioning

Version 3 (v3)

This call was introduced in version 3.


Content

  • No labels