Modbus/TCP - EV line
This page describes the Modbus register table exposed for Smappee EV charging stations.
See the Modbus TCP/IP main page for connection, configuration, supported function codes and read/write semantics.
Connector identification
The list of connectors is configured in the “Configuration” view of the ModbusTCP app. Each connector is exposed under the slave id corresponding to its position in the list (the first connector becomes slave id 1, the second slave id 2, …).
Example: with the configuration above, connector 6021001516-1 is available under slave id 1 and connector 6021001516-2 under slave id 2.
General registers
Description | Start address | # of 16-bit registers | R/W | Data type | Unit | Notes |
|---|---|---|---|---|---|---|
Manufacturer | 1 | 5 | R | ASCII | - | e.g. |
Station article number | 10 | - | R | ASCII | - | e.g. |
Station serial number | 20 | - | R | ASCII | - | e.g. |
AC or DC charging station | 30 | - | R | UNSIGNED16 | - |
|
ID of this connector | 31 | 1 | R | UNSIGNED16 | - | EV Base / EV Ultra Dual have 2 connectors |
Maximum current of this connector (installation) | 32 | 2 | R | FLOAT | A | AC charging station |
Maximum power of this connector (installation) | 34 | 2 | R | FLOAT | W | DC charging station |
Energy measurements
Description | Start address | # of 16-bit registers | R/W | Data type | Unit |
|---|---|---|---|---|---|
Active power L1 | 101 | 2 | R | FLOAT | W |
Active power L2 | 103 | 2 | R | FLOAT | W |
Active power L3 | 105 | 2 | R | FLOAT | W |
Total active power | 107 | 2 | R | FLOAT | W |
Current L1 | 109 | 2 | R | FLOAT | A |
Current L2 | 111 | 2 | R | FLOAT | A |
Current L3 | 113 | 2 | R | FLOAT | A |
Total current | 115 | 2 | R | FLOAT | A |
Active energy L1 | 117 | 2 | R | FLOAT | Wh |
Active energy L2 | 119 | 2 | R | FLOAT | Wh |
Active energy L3 | 121 | 2 | R | FLOAT | Wh |
Total active energy | 123 | 2 | R | FLOAT | Wh |
Status and transaction registers
Description | Start address | # of 16-bit registers | R/W | Data type | Unit | Notes |
|---|---|---|---|---|---|---|
EVSE state | 251 | 1 | R | UNSIGNED16 | - |
|
Charging state | 252 | 1 | R | UNSIGNED16 | - |
|
Pause session | 255 | 1 | R/W | UNSIGNED16 | - |
|
Stop session | 256 | 1 | R/W | UNSIGNED16 | - |
|
Current setpoint | 257 | 2 | R/W | FLOAT | A | AC charging station |
Power setpoint | 259 | 1 | R/W | UNSIGNED16 | kW | DC charging station |
State of charge | 260 | 1 | R | UNSIGNED16 | % | DC charging station |
Number of phases used | 261 | 1 | R | UNSIGNED16 | - | AC charging station with phase switching enabled. One of |
Session registers
Description | Start address | # of 16-bit registers | R/W | Data type | Unit | Notes |
|---|---|---|---|---|---|---|
Current session start time | 501 | 2 | R | UNSIGNED32 | s | Seconds since epoch |
Current session duration | 503 | 2 | R | UNSIGNED32 | s | e.g. |
Current session total energy | 505 | 2 | R | UNSIGNED32 | Wh | e.g. |
Previous session start time | 523 | 2 | R | UNSIGNED32 | s | Seconds since epoch |
Previous session stop time | 525 | 2 | R | UNSIGNED32 | s | Seconds since epoch |
Previous session duration | 527 | 2 | R | UNSIGNED32 | s | e.g. |
Previous session total energy | 529 | 2 | R | UNSIGNED32 | Wh | e.g. |